Waterproof RGBA 4-in-1 PixelControl LED Strip Light, 60/m, 10mm wide, by the 2m Reel

Waterproof RGBA 4-in-1 PixelControl LED Strip Light, 60/m, 10mm wide, by the 2m Reel

Product Number
wp-RGBA-4in1-pixelcontrol-reel-60
Login or create an account for price

Call us at 866-343-2908 or Contact Us to set up your corporate account.

Product Features

Sold by the 2 meter reel and foot.

RGBA 4-in-1 PixelControl LED Strip Light expands your pixel color mixing possibilities by having both amber and RGB on the same node. Combining RGB with amber white allows for richer tones that were previously impossible to achieve with Pixel LED strip light. The strip features our smallest cutting increment since it is cuttable every LED. This lets lighting designers mix RGB with amber on a pixel-by-pixel basis, allowing for smooth gradients and eye-catching fades. With one RGBA 4-in-1 LED per pixel, each two-meter reel has 120 individually accessible pixels. It features 60 high-quality RGBA LEDs per meter and a width of 10mm.

RGBA 4-in-1 PixelControl LED Strip Light is compatible with our selection of LED Pixel Controllers, giving you control over your LED lighting without needing to use DMX decoders. These controllers provide a wide array of color changing and chasing effects along with controller over speed, brightness and direction. Easily integrate RGBA 4-in-1 PixelControl into a DMX setup when used with the DMX512 V2 PixelControl Decoder. The DMX512-PX-V2 translates standard DMX output to the required data signal input required by the RGBA 4-in-1 PixelControl LED Strip Light.

Each reel of RGBA 4-in-1 PixelControl LED Strip Light is equipped with a female SM connector on the input and a male SM connector with power injector on the output on the output. When linking together multiple reels, apply power every 120 LEDs. RGBA 4-in-1 PixelControl is one-directional and the input direction is always indicated by an arrow on the strip light.

**When using with SM connectors, the maxium recommended amperage is 3.5A per SM connector.**

    Features List:
  • Waterproof
  • Each pixel is addressable in the following order: Green-Red-Blue-Amber
  • One LED per Pixel
  • 5 VDC
  • 120 Pixel per reel | 0.93 universes per reel
  • 25.5 watts per reel | 12.8 watts per meter
  • Cuttable every 0.65 in | 16.7 mm
  • Uses WS2814 IC

Inject power about every 120 LEDs. This significantly reduces any voltage drop problems. Use the power injector plugs or clips to apply power between each reel for best results.

Applications

RGBA 4-in-1 PixelControl is great anywhere you need to produce animated effects with RGB and white LED lighting. You can create custom lighting animations and impressive color-changing features with DMX or our LED pixel controllers.

Specifications

Specifications
Ambient Temperature -20°C to 40°C
Brightness 60/160/30/105 lumens/meter
Brightness 2 280/315/520/215mW/meter
Height (English) 0.26 in
Height (Metric) 6.5 mm
Input Current 5100 mA
IP Rating IP65
LED Density 60 LEDs/meter
LED Node Size 5050
LED Spacing (English) 0.66 in
LED Spacing (Metric) 16.7 mm
Length (English) 6.56 ft
Length (Metric) 2 m
Light Color RGB + Amber
Light Color Detail Red, Green, Blue, Amber
Manufacturer EnvironmentalLights
Min. Cutting Increment (English) 0.66 in
Min. Cutting Increment (Metric) 16.7 mm
Rating UL Listed, RoHS
Beam Angle 120°
Input Voltage 5 DC
Warranty 3 years limited
Power (Watts) 25.5
Power (Watts/ft) 3.9
Power (Watts/m) 12.8
Wavelength 623/522/472/592
Width (English) 0.55 in
Width (Metric) 14 mm

Documentation