RGB PixelControl LED Strip Light - 30/m - 5.6m Reel

***Please note: this strip uses GRB, not RGB as the default channel order.
Channel 1 = G, Channel 2 = R and Channel 3 = B. ***

RGB PixelControl LED Strip Light uses RGB LEDs with microscopic built-in integrated circuit chips to produce eye catching animated effects. Each RGB LED, also known as a pixel, can be individually controlled, so you can set the color for each one independent of every other LED. This allows you to create lighting effects for large displays and other installations. The ability to control the color of each LED creates an endless number of scenarios for creative lighting design. Each reel is 5.6 meters long and contains 168 LEDs per reel, utilizing just under one DMX universe. Pair this strip with a Madrix Nebula to control up to 4 reels simultaneously.

**When using with SM connectors, the maxium recommended amperage is 3.5A per SM connector.**

PixelControl strip light is one directional, so be sure to pay close attention to the orientation of the string. The input direction is always indicated by an arrow.

Features:
• 30 LEDs per meter
• 5.6 meters per reel
• Utilizes just under one DMX Universe per reel
• High quality construction
• Cutting-edge IC chip technology
• Uses WS2813 IC.
• Waterproof available

This is a fantastic product for studios, stage lighting, architectural, or decorative purposes.

• Download RGB Pixel Control Strip Light Reference Sheet Will open in a new tab
• Download RGB-pixelcontrol-30-10-5.6m Test Report Will open in a new tab
• Download DMX 512 PixelControl Decoder Manual Will open in a new tab
• Download PixelControl Getting Started Guide for the Easy Stand Alone DMX Controller SLESA U8 Will open in a new tab
• Download DMX 512 PixelControl Decoder V2 Manual Will open in a new tab
• Download PixelControl Trouble Shooting Guide Will open in a new tab
• Download 5 Channel Sync Receiver And Remote Manual Will open in a new tab
• Download LED Strip to LED Channel Compatibility Chart Will open in a new tab