- Product Features
RGBDW 4-in-1 PixelControl LED Strip Light expands your pixel color mixing possibilities by having both 6,500K warm white and RGB on the same node. Combining RGB with 6,500K white allows for richer tones that were previously impossible to achieve with Pixel LED strip light. The strip features our smallest cutting increment since it is cuttable every LED. This lets lighting designers mix RGB with 6,500K on a pixel-by-pixel basis, allowing for smooth gradients and eye-catching fades. With one RGBDW 4-in-1 LED per pixel, each two-meter reel has 120 individually accessible pixels. It features 60 high-quality RGBW LEDs per meter and a width of 10mm.
RGBDW 4-in-1 PixelControl LED Strip Light is compatible with our selection of LED Pixel Controllers, giving you control over your LED lighting without needing to use DMX decoders. These controllers provide a wide array of color changing and chasing effects along with controller over speed, brightness and direction. Easily integrate RGBDW 4-in-1 PixelControl into a DMX setup when used with the DMX512 V2 PixelControl Decoder. The DMX512-PX-V2 translates standard DMX output to the required data signal input required by the RGBDW 4-in-1 PixelControl LED Strip Light.
Each reel of RGBDW 4-in-1 PixelControl LED Strip Light is equipped with a female SM connector on the input and a male SM connector with power injector on the output on the output. When linking together multiple reels, apply power every 2 m. RGBDW 4-in-1 PixelControl is one-directional and the input direction is always indicated by an arrow on the strip light.
- Features List:
- Each pixel is addressable in the following order: Green-Red-Blue-White
- One LED per Pixel
- 5 VDC
- 120 Pixel per reel | 0.93 universes per reel
- 25.5 watts per reel | 12.8 watts per meter
- Cuttable every 0.65 in | 16.7 mm
- Uses WS2814 IC
Inject power about every 120 LEDs. This significantly reduces any voltage drop problems. Use the power injector plugs or clips to apply power between each reel for best results.
Ambient Temperature -20°C to 40°C Average Lifetime 50,000 hours Beam Angle 120° Brightness 50/145/35/320 lumens/meter Brightness 2 245/145/425/1070 mW/meter Height (English) 0.26 in Height (Metric) 6.5 mm IP Rating IP65 Input Current 5100 mA Input Voltage 5 DC LED Density 60 LEDs/meter LED Node Size 5050 LED Spacing (English) 0.66 in LED Spacing (Metric) 16.7 mm Length (English) 6.6 ft Length (Metric) 2 m Light Color RGB + White Light Color Detail Red, Green, Blue, 6,500K White Manufacturer EnvironmentalLights Min. Cutting Increment (English) 0.66 in Min. Cutting Increment (Metric) 16.7 mm Power (Watts) 25.5 Power (Watts/ft) 3.80 Power (Watts/m) 12.80 Rating UL Listed, RoHS Strip Width 10 mm Warranty 3 years limited Wavelength 623/522/472 Width (English) 0.55 in Width (Metric) 14 mm
- 4-in-1 PixelControl LED Strip Light Reference Sheet
- RGBDW-4in1-pixelcontrol-reel-60 Test Report
- DMX 512 PixelControl Decoder Manual
- PixelControl Getting Started Guide for the Easy Stand Alone DMX Controller SLESA U8
- DMX 512 PixelControl Decoder V2 Manual
- PixelControl Trouble Shooting Guide
- 5 Channel Sync Receiver And Remote Manual
- LED Strip to LED Channel Compatibility Chart
- Photos & Videos
Write Your Own Review