RGB PixelControl Bullet - Square Base - 12V - String of 50

RGB PixelControl Bullets makes it easy to create custom lighting animations and impressive color-changing displays with ease. With one module per pixel, each string has 50 individually accessible LEDs. This lets lighting designers arrange the modules in unique ways while still being easy to integrate in a 12 VDC system.

RGB PixelControl Bullets are compatible with our selection of LED Pixel Controllers, giving you control over your LED lighting without needing to use DMX decoders. These controllers provide a wide array of color changing and chasing effects along with control over speed, brightness and direction. Easily integrate RGB PixelControl Bullets into a DMX setup when used with the DMX512 V2 PixelControl Decoder. The DMX512-PX-V2 translates standard DMX output to the required data signal input required by the RGB PixelControl Bullets.

Each bullet has built-in 0.6 mm notches to punch through boards located on both sides and 100 mm (3.94 inches) of wire between bullet. They are linkable at the beginning or end.

**When using with SM connectors, the maxium recommended amperage is 3.5A per SM connector.**

Features List:
• One Bullet per Pixel
• 12 VDC
• 50 Pixels per reel | 0.30 universes per reel
• Cuttable every bullet
• WS2811 IC

Customize unique animated RGB color effects such as chasing, rotating graphic patterns, rain effects, scrolling text, color waves, company logos, the possibilities are endless! This is a fantastic product used for studios, stage lighting, architectural, or decorative purposes — an easy solution for any project that requires an intelligent LED control system!

• Download RGB-pixelcontrol-bullet-sq Test Report Will open in a new tab
• Download DMX 512 PixelControl Decoder Manual Will open in a new tab
• Download DMX 512 PixelPro Decoder Manual Will open in a new tab
• Download PixelControl Trouble Shooting Guide Will open in a new tab
• Download 5 Channel Sync Receiver And Remote Manual Will open in a new tab