This product has been discontinued and has limited stock available. Please contact our sales team for current stock levels.
High Brightness CurrentControl LED Light Bars can be used for any application that needs high brightness LEDs.
Each light bar has 3 high brightness LEDs per bar. About 4.33 inches of space between each high brightness LED. They are easy to install using any of the precut mounting holes. Easy to dim or control using any of our LED dimming drivers, controllers or pulse dimmers. Use a DMX controller in conjunction with our DMX decoders for ultimate control over your lighting.
- Daylight White (6500Kelvin.)
- Beam angle is 10x40 (degrees), with the narrow beam running along the wires.
- CRI = 70+.
- Brightness = 607 lumens/bar.
- 24 volts DC.
- 7.2 watts/bar.
- Length of each bar: 8.75 in = 222.3 mm.
- Width of each bar: 1.26 in = 32 mm.
- Height of each bar: 0.61 in = 15.5 mm.
- LED spacing: 4.33 in = 110 mm.
- Linkable up to: 10 bars.
- UL Listed, IP66, RoHS.
- 50,000 hours expected lifetime.
- Warranty: 3 years limited.
- No Ultra-Violet emissions, so it won't harm your art or documents.
- We use high quality LEDs for maximum color vibrancy, longevity and color rendering. We pay more for our LED components, and you'll benefit from the difference. This is not a commodity product. Quality matters, and the materials, controls, connections and tech support we provide will make your project successful.
- We provide detailed installation instructions, design criteria and technical support upon request.
**NOTE: EdgeLight LED light bars have high inrush current due to their constant-wattage design. This can cause some power supplies to enter overcurrent protection mode if the maximum linkable drivers are connected to power all at once. If this happens, simply power up the driver and connect a few bars at a time.
**NOTE: EdgeLight LED light bars are high power-density and must be mounted to a metal substrate of at least 0.5 kg [1.1 lbs] of aluminum or 1 kg [2.2 lbs] of steel per meter of LED light bar to ensure effective heat dissipation. EdgeLight LED light bars have high inrush current due to their constant-wattage design. This can cause some power supplies to enter overcurrent protection mode if the maximum linkable drivers are connected to power all at once. If this happens, simply power up the driver and connect a few bars at a time.
These high brightness LED Light Bars are used in signs and light boxes, among other applications. They are bright and easy to install using the built-in mounting holes.