- Product Features
The DiGidot TRxB is a small receiver module that can be used to extend the data cable distance between a DiGidot C4 and SPI controlled LED strips. It outputs a SPI (data only) protocol and can be soldered directly to most pixel controlled LED strips. The standard distance between a DiGidot C4 output is only a few meters (we recommend 2 meters / 6.5 ft). The maximum distance between a DiGidot Transmitter (Tx) and Receiver (Rx) module is 250 meters. It features a RJ45 bus to insert a data cable conveniently but can also be soldered if necessary.
Note: This product is a PCB only and needs to be soldered. All grounds must be connected at all times.
We offer an optional screw terminal that can be soldered on the output This improves connecting pre wired LED products easier and more reliable. (Please indicate with your order if you need them.)
- Supply voltage: 5-48 Vdc
- SPI type: Data only
- Dimensions: 43.8 x 15.8 x 15.3 mm
- Weight: 6 gr
Finish Black Height (English) 0.54 in Height (Metric) 13.6 mm IP Rating IP20 Input Voltage 5, 12 or 24 DC Length (English) 1.72 in Length (Metric) 43.8 mm Manufacturer DiGidot Rating CE,RoHS Warranty 2 year Width (English) 0.62 in Width (Metric) 15.8 mm
- Photos & Videos
Write Your Own Review