60 Watt 12 VDC Driver with Dimming Knob

60 Watt 12 VDC Driver with Dimming Knob

Product Number
Driver-60-12D-NA
Availability: In stock
Ships in: 1 day, typically
$77.75

Commercial Project? Account-based pricing available. Call us at 888-880-1880 or Contact Us.

Product Features

Use this 60 Watt Class 2 DC driver (power supply) from EnvironmentalLights between your 120 VAC input and your 12 VDC LED lights to achieve smooth dimming with the built-in dimming knob.

  • 60 watts maximum output.
  • 12 volts DC output. (Constant voltage)
  • 5 amp maximum output.
  • UL listed Class 2 power supply.
  • Built-in dimming control with 670Hz PWM output.
  • Very easy to wire: 3 input wires from 120 VAC circuit on the primary side and 2 output wires on the secondary side for the load.
  • Operates on 50 or 60 hertz input.
  • Suitable for hardwiring: has multiple 7/8 inch knockouts in the wiring compartment.
  • Protections: Short circuit / Overload / Over voltage.
  • Low ripple noise.
  • Greater than 82% efficiency.
  • No minimum load and no load balancing required.
  • Rugged metal housing.
  • Operating temperature range: -25°C to +45°C.
  • UL, FCC, RoHS listed.
  • UL File #: E345130, CCN: FKSZ Drivers for Light-emitting-diode Arrays, Modules and Controllers.
  • Warranty: 1 year.
  • Size: 11.2 x 2.52 x 1.5 inches.
  • Weight: 2 lbs.

Applications

For use with 12 volt DC LED lighting or other loads. (Constant voltage) Not for use with dimmers.

Specifications

Specifications
Height (English) 1.5 in
Height (Metric) 38 mm
Input Current 1300 mA
IP Rating IP20
Length (English) 11.18 in
Length (Metric) 284 mm
Rating UL Listed, FCC, RoHS
Input Voltage 120 AC
Warranty 1 year
Power (Watts) 60
Width (English) 2.52 in
Width (Metric) 64 mm

Documentation