Sold by the 2 meter reel and foot.
RGBWW 4-in-1 PixelControl LED Strip Light expands your pixel color mixing possibilities by having both 2,700K warm white and RGB on the same node. Combining RGB with 2,700K white allows for richer tones that were previously impossible to achieve with Pixel LED strip light. The strip features our smallest cutting increment since it is cuttable every LED. This lets lighting designers mix RGB with Warm White on a pixel-by-pixel basis, allowing for smooth gradients and eye-catching fades. With one RGBWW 4-in-1 LED per pixel, each two-meter reel has 120 individually accessible pixels. It features 60 high-quality RGBW LEDs per meter and a width of 10mm.
RGBWW 4-in-1 PixelControl LED Strip Light is compatible with our selection of LED Pixel Controllers, giving you control over your LED lighting without needing to use DMX decoders. These controllers provide a wide array of color changing and chasing effects along with controller over speed, brightness and direction. Easily integrate RGBWW 4-in-1 PixelControl into a DMX setup when used with the DMX512 PixelControl Decoder. The DMX512-PX-V2 translates standard DMX output to the required data signal input required by the RGBWW 4-in-1 PixelControl LED Strip Light.
Each reel of RGBWW 4-in-1 PixelControl LED Strip Light is equipped with a female SM connector on the input and a male SM connector with power injector on the output on the output. When linking together multiple reels, apply power every 2 m. RGBWW 4-in-1 PixelControl is one-directional and the input direction is always indicated by an arrow on the strip light.
- Each pixel is addressable in the following order: Green-Red-Blue-White
- One LED per Pixel
- 5 VDC
- 120 Pixel per reel | 0.93 universes per reel
- 25.5 watts per reel | 12.8 watts per meter
- Cuttable every 0.65 in | 16.7 mm
- Uses WS2814 IC
Inject power about every 120 LEDs. This significantly reduces any voltage drop problems. Use the power injector plugs or clips to apply power between each reel for best results.
RGBWW 4-in-1 PixelControl is great anywhere you need to produce animated effects with RGB and white LED lighting. You can create custom lighting animations and impressive color-changing features with DMX or our LED pixel controllers.