Enttec Open DMX Ethernet ODE MK2

The ODE MK2 is a solid-state single universe RDM compatible DMX node designed for the highest level of portability, simplicity and practicality. A perfect solution for converting from a multitude of ethernet based lighting protocols to physical DMX and vice versa, without the need for adaptors. The ODE MK2 features modern and intuitive web-based configuration including, diagnostics, either LTP or HTP Merging (with up to 2 sources) and RDM support. All in the form factor of a portable single universe node.

The ODE MK2’s four LED indicators can be used to visually check the status of your ODE MK2 without the need to view the web interface. Use the ODE MK2 in conjunction with a wireless router to give a buffered DMX output from any sACN / ArtNet compatible iOS or Android application.

Easy web page configuration

Web-based configuration. Use your favorite browser, and click a few buttons and you are done.

Multiple protocols support

Supports Art-Net 1/2/3, Streaming ACN sACN, and ESP. Use whichever you prefer, simply change the protocol using the web configuration.

Ready to connect

ODE MK2 is factory set to use DHCP IP addressing. Simply connect to your existing router, and any supported software will find it.

Flexible options

Supports either LTP or HTP Merging (up to 2 sources). Either enable or disable merging, to suit your needs.

RDM over Art-Net

Supports RDM Over Art-Net (controller). When enabled, all RDM fixtures connected to the ODE, can be configured using any RDM over Art-net software.

Input or Output

Choose from Input mode (receives DMX, and sends over Ethernet), or Output mode (sends DMX). Input mode supports options for broadcast or unicast.

• Download Enttec ODE MK2 Brochure Will open in a new tab
• Download Enttec ODE MK2 Datasheet Will open in a new tab
• Download Enttec ODE MK2 Manual Will open in a new tab