PowerPro 6 Channel DMX Decoder - 12V - 190W

The PowerPro 6 Channel DMX Decoder is a self-contained decoder and power supply. It simplifies the hardware needed for DMX-lighting applications by enclosing both power supply and decoder functions within a single housing. It accommodates up to 6 output channels of LED lighting with 6 amps per channel. The decoder takes the output from any standard DMX console or controller and decodes the signal so you can drive up to 6 channels of LEDs. The appearance of flicker on studio video equipment is virtually eliminated with a switchable PWM frequency of 5 or 22.5 kHz. The PowerPro 6 Channel DMX Decoder includes a 12 VDC power supply that is rated for up to 190 watts. An analog numerical display is used for setting the DMX address without connecting power and without any DIP switches. DMX connection options include two 5-pin XLR In/Out ports and two RJ45 In/Out ports. PowerCon connectors are used for AC power in and for daisy chaining multiple PowerPro decoders together. Available LED outputs include a locking connector for pre-wired LED strip and a screwless terminal block. Additionally, it features a receptacle for use with Molex connectors.

• 6 channels of output
• 6 amps per channel
• 5-pin XLR DMX connectors
• PowerCon Connectors
• Switchable 5 or 22.5 kHz PWM output
• 190 Watts maximum output
• 12 Volt DC output
• Receptacle for Molex Connectors
• Daisy chain capable, recommended maximum of 3 on a 15A circuit

• Download PowerPro 6 Channel DMX Decoder Reference Sheet Will open in a new tab