StudioPro 6 Channel DMX Decoder - 5-pin XLR - 6A per Channel

The StudioPro 6 Channel DMX Decoders are high-capacity decoders that accommodate up to 6 output channels of LED lighting. Each decoder is equipped with 5-pin XLR DMX outputs. Each decoder takes the DMX output from any standard DMX console or controller, and decodes the signal so you can drive up to 6 channels of LEDs, such as 6-in-1 ColorPlus LED Strip Light or two separate runs of RGB. The switchable PWM frequency up to 22.5 kHz helps prevent flicker on high speed cameras and avoid possible interference with audio recording equipment. It is compatible with both 12 and 24 VDC LED lighting.

Features:
• 6 output channels
• 6 Amps per channel capacity
• 5-pin XLR DMX in/out connections
• RJ45 DMX in/out connections
• Drive 432W/864W at 12V/24V respectively
• Switchable 5 or 22.5 kHz PWM output
• Switchable 8-bit or 16-bit DMX input
• Works with 12 and 24 VDC LED lighting

This decoder is for any application requiring conversion of DMX to PWM signals while driving up to 6 channels of LEDs.

• Download StudioPro 6 Channel DMX Decoder Reference Sheet Will open in a new tab
• Download StudioPro 6 Channel DMX Decoder Manual Will open in a new tab