Account-based pricing available. Call us at 888-880-1880 to discuss commercial pricing options.24 channels 6 terminal blocks with 4 channels each 4 amps per channel maximum sustained power 12 or 24 VDC input and output Digital readout legibly displays the DMX address, which is useful in dimly lit rooms Easily change DMX address without DIP switch math Converts standard DMX signal to PWM output suitable for driving 12 or 24 VDC LED lighting The buttons below the display screen allow you to set the decoder’s lowest address so it uses the address you desire from your DMX program Standalone mode – no software required Field controllable RDM compatible Ability to adjust the number of output channels High 24 x 4A current capacity means it can drive up to 1152W/2304W per receiver at 12V/24V respectively Adjustable PWM frequency. Choose a preset value between 500 Hz and 30,000 Hz
The DMX Digital Decoder - 24 Channel (4A x 24 Channel) - 30kHz Adjustable PWM is a robust 24-channel digital DMX decoder with an adjustable PWM output of 500Hz to 30kHz. This decoder is highly configurable and features a convenient digital display. The display allows the setup of DMX addresses without the use of DIP switches. It can also change the PWM frequency and dimming curve to suit your project’s specific needs. The decoder supports 24 channels with a maximum of 4 amps per channel. This means you can drive up to 1152W/2304W per receiver at 12V/24V respectively. This decoder has 6 terminal blocks that each have 4 channels. The decoder also supports an 8-bit or 16-bit gray scale control on the output channels.