Special price! While supplies last. About 3651 left. All sales are final.
These high brightness modules (pods) are for indoor or outdoor installations and they are flexible and easy to position.
Easy to install: Double-sided 3M foam tape on the back. Just peel and stick. Or you can use the screw hole to surface mount securely. About 3.5 inches of wire between modules. Simply cut and splice the wire wherever you like. Modules are made in sets of 50. Because the wire is flexible, you can array your modules around your installation as you wish. If you have dark spots, you can reposition at will. Easy to dim or control using any of our LED dimming drivers, controllers or pulse dimmers. Use a DMX controller in conjunction with our DMX decoders for ultimate control over your lighting.
- High strength polycarbonate package.
- Daylight White (6000Kelvin.)
- Beam angle is 160 (degrees).
- CRI = 75+.
- IP65 waterproof.
- 12 volts DC.
- 0.36 watts/module.
- Length: 1.1 in = 29.2 mm.
- Width: 0.51 in = 13 mm.
- Height: 0.37 in = 9.5 mm.
- LED spacing: 4.61 in = 117 mm.
- Cuttable between modules.
- IP65, RoHS.
- 50,000 hours expected lifetime.
- Warranty: 3 years limited.
- No Ultra-Violet emissions, so it won't harm your art or documents.
- We use high quality LEDs for maximum color vibrancy, longevity and color rendering. We pay more for our LED components, and you'll benefit from the difference. This is not a commodity product. Quality matters, and the materials, controls, connections and tech support we provide will make your project successful.
- Cut LED modules are not returnable.
- We provide detailed installation instructions, design criteria and technical support upon request.
- When you wire your modules, we recommend you connect power to both ends. This significantly reduces any voltage drop problems over the line that would lead to reduced flux far from the driver.