The DMX Decoder 4 Channel – 5A Per Channel, 8/16-bit with Stand-Alone Modes acts as both a DMX controller and a basic RGBW controller. An integrated high-resolution OLED display allows DMX settings and stand-alone modes to be configured directly on the decoder. DMX settings include starting address, dimming curve and DMX resolution. Stand-alone modes include static color mixing, color changing and strobing modes. It accepts 5-24V DC input voltage range at up to five amps per channel maximum current.Converts standard DMX signal to PWM output suitable for driving 5, 12 or 24 VDC LED lighting. 5 amp per channel maximum sustained power. 4 channels. 5, 12 or 24 VDC output.High resolution OLED screen can display 4-lines of text. Easily change DMX address without DIP switch math. 2,000 Hz PWM frequency for flicker-free performance in most applications. Substantial 4 x 5A current capacity means it can drive up to 240W/480W per decoder at 12V/24V respectively. Switchable 8-bit or 16-bit DMX input. Configurable stand-alone modes, including static color, color fade and color strobe. Adjustable dimming curve for a best fit for your application. Terminal block connectors for DMX communication. Mounting tabs are integrated into the rugged chassis for easy installation. Use amplifiers for additional power, if necessary. 0 to 110°F recommended operating range. 1 year warranty. Generally, we do not recommend chaining more than 32 decoders together without using an amplifier or splitter/amplifier, such as those listed as companion parts. These are available in 1 output, 3 output, 5 output and 11 output versions.