Account-based pricing available. Call us at 888-880-1880 to discuss commercial pricing options.While supplies last!
This product will soon be discontinued.
This sleek in-line occupancy sensor is a great addition to your LED undercabinet system from EnvironmentalLights. You can set the "on" period to any time between about 10 seconds and 12 minutes. Simple to install, simple to use. You can install it anywhere in your system, at the head end, the tail end or in the middle. Elegant and effective. The kit includes:
Important note: This occupancy sensor cannot be used in conjunction with the touch dimmer TD1. You CAN use it with our dimming drivers 48W24VDim, 96W24VDim or 3x96W24VDimX. You may also use more than one OS1 in an installation.
- In-line occupancy sensor unit, with available connections on both ends.
- Mounting clip and screw.
- Turnable clip and screw.
- 2 bar joiners.
- Special gray power switch cord, which is different from the regular black power cords.
Do not power more than 8 feet of light bars through the occupancy sensor. You may use the occupancy sensor in very large installations—just make sure that the power supply is on the same side of the installation as most of the lighting so the power is not all running through the occupancy sensor.