Product Features

Waterproof! Detailed instructions for how to waterproof the ends are available. It's easy.

Click here for information on using LED strips for edge-lit glass or acrylic applications.

On-chip color-mixing! That means the red, green and blue primary colors are mixed into your desired color together, so you can't see the individual elements. This is much better than strips that have the red, green and blue separate. With separate red, green and blue elements, you need to allow several inches between the strip and your projection target for the light to mix—otherwise you'll see the individual colors on the projection target. With this strip, you can downlight or uplight a wall, and it will look great right next to the strip. Sample kits of all our LED strips are available.

• Bright, flexible LED strip lighting creates stunning effects.
• Easy to install—Non-waterproof version has high-adhesion stickyback. Just peel off the wax paper and stick it to any clean, dry substrate. Waterproof version comes with 10 or more rubber tie downs if you buy the complete reel, plus a glue tube, plus at least 4 ribbon-to-cable connectors, plus 2 no-hole caps for dead ends, plus 2 4-hole caps for the live ends, as pictured at lower left of waterproof reel pages. You get those accessories with full-reel purchases only.


• Our Programmable Micro Remote LED Controller controls up to 2.7 5-meter reels without an amplifier. That amplifier adds capacity for another 4 5-meter reels (600 LEDs.) Call to obtain simple circuit diagrams for larger installations—It's easy to create larger systems.
• For a deluxe system, you can use our Easy Stand Alone DMX Controller and 12 VDC Power Supply combined with our DMX Decoder for fully programmed light shows. Use your Windows PC to control red, green and blue levels with "sliders." Design custom colors, set the step duration and fade to whatever time you choose. Set global dimming levels for all colors at each step, if you like. Write the program to the controller, disconnect it from your computer and install the controller in stand-alone mode for state-of-the-art controls on a budget!
• For a sophisticated wall-mount controller, use the Traxon Light Drive Controller.
• Easy-to-use 4 conductor ribbon to cable connectors and 4 conductor ribbon to ribbon connectors are available
• Cuttable in segments of 3 LEDs on a 3.94 inch long strip—each strip will work independently. See the cut marks and 4 solder pads in the picture below (common, red, green and blue)
• No Ultra-Violet emissions, so it won't harm your art or documents.
• RoHS rated
• We use high quality LEDs for maximum color vibrancy, longevity and a well-balanced "all-on" white. We pay more for our LED components, and you'll benefit from the difference. This is not a commodity product. Quality matters, and the materials, controls, connections and tech support we provide will make your project successful.
• We provide detailed installation instructions, design criteria and specifications upon request. We also provide technical support and can refer you to skilled programmers for the DMX controller, if you decide not to program it yourself.

Use our Waterproof LED strip lighting if you want to immerse it.