- Product Features
-
This is a Buck-Boost DC/DC Converter. Buck-boost means that the unit will 'buck' excess voltage or 'boost' insufficient voltage to regulate DC output. This allows you to use your 5 volt DC LEDs on vehicles, solar systems or other off-grid systems, in which the charging system may drive the voltage over 5 volts DC.
- 50 watts maximum output.
- 5 volts DC output, with fine-tune adjustment screw. (Constant voltage.)
- 10 amp maximum output.
- Working temperature: -10 to +60°C.
- Touch-guard screw terminals.
- Protections: Short circuit / Overload / Over voltage.
- Overload protection type: hiccup mode, recovers automatically after fault condition is removed.
- Full load burn-in tested.
- Built-in electromagnetic impulse filter.
- Low ripple noise.
- Accepts 9.2-18 VDC input.
- No minimum load and no load balancing required.
- Proven reliability and rugged housing.
- Warranty: 2 years.
- Optional mounting kit is available.
- Do not use a dimmer on the primary side.
- Applications
-
Use to protect 5 volt DC LED systems on vehicles, solar systems or other off-grid systems, in which the charging system may drive the voltage over 5 volts DC.
- Specifications
-
Power (Watts) 50 Input Voltage 9.2-18 VDC Output Voltage 5 DC Length (English) 6.25 in Length (Metric) 159 mm Width (English) 3.86 in Width (Metric) 98 mm Height (English) 1.5 in Height (Metric) 38 mm Rating CE Manufacturer Mean Well Warranty 2 years - Documentation
- Photos & Videos
- Companion Parts
-













Product Catalog










