This controller is for our Versaline LED Christmas lights and will not operate other light strings. Controller effects include:
Single Bulb Chase;
Single Bulb Fade;
Two Bulb Fade;
Chase to Dim;
Fade to Dim;
The 10-function controller is connected between the power supply and the lights. The four buttons are:
- Power - Select on (0), off (no number) or timer (1-9). When you select timer mode (1-9), the lights come on for X2 hours selected, every 24 hours at the time you made the timer selection. So if you select “timer = 2” at 6:00 pm, the lights will come on for 4 hours from 6:00 pm to 10:00 pm every night.
- Function - Choose a setting (0-9) from the 10 functions listed above.
- Speed - Change the speed from 1 slowest to 9 fastest. In Steady On mode, the Speed control is a dimmer.
- Color-flip - Choose a setting 0-1, P, or F as described below. This color-flip function only works when the controller is used with Versaline Color-flip lights.
0 - Primary Color
1 - Secondary Color
P - Creates a Phasing Change
F - Creates a Flip Change
- Controls up to 4,800 lights (although your power supply probably has a lower limit. See manual at "Documentation" tab.)
- Controller remembers the mode you set if you use a timer or lose power.
- RoHS (Reduction of Hazardous Substances) compliant. Lead was not used to make these products.
- Beautiful, elegant and tough.
- 24 VDC native operating voltage.
- 3-year manufacturer seasonal use warranty.