Mega flux infrared LED strip for the surveillance and multitouch markets. Make larger multitouch screens than ever before possible with economical LED strips! Tight spectral power distribution, centered on 850 nm. Complete information on our infrared LED line for multitouch and surveillance, including independent test lab results, is available in our
Multitouch Screen IR LED Buying Guide.
Easy to install: Has high-adhesion stickyback. Just peel off the wax paper and stick it to any clean, dry substrate.
Easy to dim or control using any of our LED dimming drivers, controllers or pulse dimmers. Or use any DMX controller, in conjunction with our DMX-4-5000 or DMX-24-5000 decoders.
- Sold by the 5 meter reel, by the foot, and as a 1-foot sample kit, including adapter.
- Infra Red 850 nm (850 nm wavelength.)
- Not waterproof.
- 534 mW/foot = 1752 mW/meter.
- 12 volts DC.
- 65 watts (4 watts/foot = 13 watts/meter.)
- Length: 16.4 ft = 5 m.
- Width: 0.39 in = 10 mm.
- Height: 0.08 in = 2 mm.
- LED spacing: 0.66 in = 16.7 mm.
- Cuttable in segments. Cutting increment: 1.97 in = 50 mm.
- RoHS.
- 50,000 hours expected lifetime.
- Warranty: 3 years limited.
- Easy-to-use ribbon to cable connectors, ribbon to ribbon connectors and ribbon to ribbon jumpers are available. (See companion parts.)
- No Ultra-Violet emissions, so it won't harm your art or documents.
- We use high quality LEDs for maximum flux and reliability. We pay more for our LED components, and you'll benefit from the difference. This is not a commodity product. Quality matters, and the materials, controls, connections and tech support we provide will make your project successful.
- Cut LED strip lighting is not returnable.
- We provide detailed installation instructions, design criteria and technical support upon request.
- Can be used with led-strip-light-bar-10, led-track-aluminum or 3/8-inch wide aluminum track shown in companion parts.
NOTE: InfraRed light is not visible. Do not buy this product for accent lighting or general illumination. It is for special purposes only. Excessive exposure to infrared light may be hazardous. Here is a scientific paper on the
hazards. Infrared LED strips do not dim fully on our voltage-varying dimmers, such as 36W12VDim, 48W24VDim, 60W12VDim, 96W24VDim, 4x60W12VDimX or 3x96W24VDimX. Use a pulse dimmer instead.