This high brightness ribbon is TWICE as bright as our popular regular LED strip lighting. We used high efficacy LEDs and we packed them a bit closer together (390 per 5 meter reel, instead of 300.) Power consumption is only 32 watts per reel, versus 24 for the regular, so we achieved about twice the lumen output for only 33% more power. The other major difference is that the segment length for high brightness ribbon is 3.85 cm, versus 5 cm for the regular. You can use the same connectors as for the regular ribbon.
Easy to install:
- Non-waterproof version has high-adhesion stickyback. Just peel off the wax paper and stick it to any clean, dry substrate.
- Waterproof version comes with 20 rubber tie downs if you buy the complete reel, plus a glue tube, plus 5 ribbon-to-cable connectors, plus 2 caps for dead ends, plus 2 caps for the live ends. You get those accessories with full-reel purchases only. Or you can buy the special foam tape and glue we list as companion parts.
Easy to dim or control using any of our LED dimming drivers, controllers or pulse dimmers. Or use any DMX controller, in conjunction with our DMX-4-5000 or DMX-24-5000 decoders.
- Sold by the 5 meter reel, by the foot, and as a 1-foot sample kit, including adapter.
- Daylight White (6500° Kelvin.)
- CRI = 66.
- Not waterproof. Available in waterproof and non-waterproof.
- 180 lumens/foot = 591.8 lumens/meter.
- 12 volts DC.
- 2 watts (1.9 watts/foot = 6.4 watts/meter.)
- Length: 12.1 in = 307.692307692308 mm.
- Width: 0.31 in = 8 mm.
- Height: 0.08 in = 2 mm.
- LED spacing: 0.5 in = 12.8 mm.
- Cuttable in segments. Cutting increment: 1.52 in = 38.5 mm.
- RoHS.
- 50,000 hours expected lifetime.
- Warranty: 3 years limited.
- Easy-to-use ribbon to cable connectors, ribbon to ribbon connectors and ribbon to ribbon jumpers are available. (See companion parts.)
- No Ultra-Violet emissions, so it won't harm your art or documents.
- We use high quality LEDs for maximum color vibrancy, longevity and color rendering. We pay more for our LED components, and you'll benefit from the difference. This is not a commodity product. Quality matters, and the materials, controls, connections and tech support we provide will make your project successful.
- Cut LED strip lighting is not returnable.
- We provide detailed installation instructions, design criteria and technical support upon request.
- Can be used with led-strip-light-bar-8, led-track-aluminum or 3/8-inch wide aluminum track shown in companion parts.