- 150 watts maximum output.
- 12 volts DC output, with fine-tune adjustment screw. (Constant voltage.)
- 12.5 amp maximum output.
- Built-in active Power Factor Correction (PFC): PF>0.93.
- Working temperature: -10 to +60°C.
- Touch-guard screw terminals.
- Protections: Short circuit / Overload / Over voltage.
- Overload protection type: hiccup mode, recovers automatically after fault condition is removed.
- Full load burn-in tested.
- Built-in electromagnetic impulse filter.
- Low ripple noise.
- Universal, auto-sensing: accepts 85-264 VAC or 120-370 VDC input without adjustment.
- No minimum load and no load balancing required.
- Proven reliability and rugged housing.
- No cord included.
- UL60950-1, TUV EN60950-1 approved.
- Warranty: 3 years.
- Optional mounting kit is available.
- Do not use a dimmer on the primary side.
We don't recommend SP-150 enclosed supplies to be used with pulse dimmers. The SP-150 is likely to make a whining noise on certain LED strip lights. Use the HLG-150H waterproof supply, which is quiet because it is filled with waterproof potting epoxy, which dampens the sound.