- Product Features
About 6 inches long.
Just slip it on the end of the ribbon, and click-lock it into place. Look! No solder!
Really easy to use to join two pieces of LED strip lighting, inject power, and make a turn in the plane of the LED strip lighting tape. Built in power injector with a 2.1 mm inside diameter jack that fits our adapters.
Very handy for splicing our 4-conductor RGB PixelPro LED strip lighting together, ribbon-to-ribbon, with up to a 6-inch space between ribbon segments.
Typically, this is used for injecting power or making a right turn with our LED strips: cut the strip on the cut line, splice the ribbon electrically with this jumper and bend the wires 90 degrees (or whatever angle you require,) and keep going with the LED strip. Use the 2.1mm jack to inject power as needed.
Length (English) 6.5 in Length (Metric) 165.1 mm Width (English) 0.69 in Width (Metric) 17.6 mm Height (English) 0.44 in Height (Metric) 11 mm Rating RoHS
- Photos & Videos