+ Connector for Waterproof Dimmable Super Flat LED Rope Light (24 VDC) (Color Changing)

Quick Overview

Use "L", "T" and "+" connectors to apply power to our RGB Super Flat Rope. Slide a 1 inch x 1 inch heat shrink tube over each leg of the rope you will connect first. Then match the markings on the L, T or + with those on the rope. Gently push the prongs into the rope and check to be sure the rope lights properly. Apply glue and slide the heat shrink tube over the junction before using a heat gun to shrink the tube over the junction for a waterproof connection.